A Football Analogy

Today, August 20th marks exactly three months for me in Malawi and on Sunday I will be making the four to six hour journey by bus to start EWB’s “re-integration training” in Lilongwe, the capital city. This will likely be my last in-country post and I would like to thank everyone who’s supported me on this journey.

Playing soccer (or bola in Chitonga) here in Malawi is definitely an experience. It’s an even more remarkable community event when I join into play, with all the kids within view or earshot dropping whatever they’re doing and rushing to witness the foreigner flailing around the pitch and tripping over himself, and occasionally my host father standing beside the field shaking his head and smiling.

It is amazing how much soccer goes on without a soccer ball. Kids collect discarded plastic bags and through a careful process melt and tie bits together forming a surprisingly live ball which works perfectly for pick-up matches. Despite this some NGOs spend their time and money handing out soccer balls, and around Mpamba a few carcasses of these free balls can be seen, busted open from hard use. That’s not to say they’re not more durable than the home made balls, those things fall apart all the time! Luckily, with a bit of string, or a knife heated in the fire and a scrap of plastic a quick, cheap repair can be made to the ball and the game continues.

The same could be said for the water sector in Malawi. Many NGOs, and research papers spend time obsessing over the breakdown rates of their, and other organizations pumps. Many of them re-engineer designs every few years in an attempt to make their pump more durable. Though counter-intuitive, this is a bad thing.

No matter how well engineered, eventually every pump will break down and require maintenance of some sort. Just like our two soccer balls, a pump that can be repaired at a low cost, with materials that can be found nearby is ideal. Many NGOs, EWB included put a heavy emphasis on setting up a particular community member as designated to perform maintenance on a number of wells, usually as a business. As well, spare parts need to be available in shops relatively near these communities, such as Trading Centres where they purchase other day-to-day necessities. A pump with breaks down frequently, and is cheap to repair has the potential to drive enough demand to create a profitable supply chain of spare parts, making it possible for shop owners to stock the parts as a viable business. It also means that trained individuals keep their knowledge up to date by doing frequent repairs and maintenance, and business is more profitable for them.

This dichotomy, where well designed pumps lead to bad water programs has taught me to never look at another aid program the same way again. Instead of asking questions about technologies, ask questions about approach, where are decisions in the organization coming from? Does the program convey patronism or empowerment? What evidence is there of sustainability?

After three months in Malawi my footwork on the pitch may not have improved much, but I like to think that my thinking has.

Daniel

Anatomy of a Shallow Well Part 3

Pump assembly.

The pump is one of the most interesting parts of a well or borehole. It’s definitely the most complicated, the most likely to break and sometimes the most controversial (to learn more see EWB Volunteer Owen Scott’s series on the Playpump, as well as a new Frontline documentary). It’s also the part which most frequently breaks down and renders a pump non functional. It’s these breakdowns which in theory should create a financial driver for people who have been trained to repair pumps, and for small grocery owners to stock replacement parts for sale, this unfortunately is only sometimes the case.

When we last left our well, it had been covered with a concrete pedestal and apron to protect it from contamination, and the “civil works” and washing slab had been built from bricks and concrete. We arrived late in the afternoon in a minibus carrying all the parts required for the Afridev hand-pump and right away set to work.

A “foot valve” assembly in the bottom cylinder  will keep water inside the pipe that the hand-pump pumps through. This assembly is cemented with PVC solvent cement and a small fire to the PVC pipe. Then, pipe centrizers are slid onto the pipe. These guide the rope holding on to the bottom cylinder, in case it should come unglued. This is slid down the well, and the pipe is measured for length, ensuring that the foot valve is at least one foot above the bottom of the well to stop it from being clogged.

An assembly to hold the pipe in place and centered is cemented to the pipe and it is slid back down the well. The ropes are tightened, and the assembly is bolted to the riser pipe. On top of this the pump casing is also bolted, and the Afridev starts to take shape. Now the plunger, and plunger rod are attached to two more rods and descend down the well. The plunger is a white plastic piece (similar to a foot valve) with a bobbin that creates a valve and is used to raise the water level up the PVC pipe.

The rod is then descended down the well, attaching to interlocking rods as necessary to reach the bottom of the pipe. The top rod is measured to length and marked, then the whole thing comes back out of the well to cut the rod to length.

Next, a fulcrum is attached to the top of the rod. This is where the pump handle is attached, allowing a person to move the rod up and down from outside the casing. A pin and bearings are attached to this fulcrum, and the pump handle attaches through the casing to these. If that makes any sense at all, for some clarity hover over the picture.

Now, the pump is functioning fine, and all that remains to do is  re-attach the cover, and get a bucket.

 

 

For more pictures from today, and the rest of the well construction see my online Picassa album at http://picasaweb.google.com/105874389983784481295/DanInMalawi02#5485966990096667314

Reach Out and Touch

It's Sunday June 20th as I write this, and I’ve just finished eating dinner with my host mother and host cousin Aaron. Aaron turns on the TV because the second featurette in a series that the only public television station in the country, Malawi Television (TVM) has just started. The program is called Reach Out and Touch and the commentator tours around rural communities in a particular region of the country, this particular episode featured the northern region, and interviews people living in vulnerable situations such as child headed households, people in need of and without access to medical care and the elderly living in poverty without community support.

The program does not actively ask for donations to any particular fund or organization, but instead to the featured individuals directly. Bags of maize are bought to feed children, wheelchairs for the infirmed and hospital bills paid for those who are ill. The program is only broadcast in Malawi, and all donations come from fellow Malawians. It is interesting to see that, at a time when foreign NGOs such as EWB are running programs based on “building capacity” instead of building dependence and thus avoids hand-outs, the program created by Malawians to address their own country’s issues does the opposite.

Daniel